Move 2 or 3 blocks at a time. No lifting!
The Quick-E-Block Clamp can grab multiple blocks
from your pallets just as they are delivered to the job site. There is no
need to shuffle block around to get it aligned. The Quick-E-Block Clamp is so user friendly. It adjusts quickly and easily. You and your workers will no longer suffer fatigue from hauling
block. You’ll come out looking like a hero!
This is the one we've been waiting for!
INSTRUCTIONS:
Use the Quick-E-Block Clamp by pulling the bottom pin to adjust to the clamp width. The coupler is held in place with a second pin - it should be centered between the two
clamping pads. Hook a rated chain, cable or strap to your
machine and the clamp. You’re now ready to lay block with
minimal effort! Set the block about 6” from the those last laid on your wall and simply slide it into place. When laying multiple cells with tapered sides, one block will be reversed. Simply spin the block around and slide it into place. You’re never lifting the block - just slide it.
NOTE: A hard hat should be worn at all times. Stay out of the swing zone and
never get under the clamped block.
Ask for the Quick-E-BLOCK CLAMP at your local Techo-Bloc dealer.
Paver Tool Innovators, LLC